Wednesday, June 17, 2020

Scribers are made of.

31] Scribers are made of...
A] Mild steel 
B] High carbon steel 
C] Brass 
D] Cast iron

The part of the universal surface gauge which helps to draw a parallel line along a datum edge is the.

30] The part of the universal surface gauge which helps to draw a parallel line along a datum edge is the..
A] Rocker arm 
B] Snug 
C] Fine adjustment screw 
D] Guide pins

The size of an engineer’s vice is specified by the.

29] The size of an engineer’s vice is specified by the...
A] Length of the movable jaw 
B] Width of the jaws
C] Height of the vice 
D] Maximum opening of the jaws

The reference surface during marking is provided by the.

28] The reference surface during marking is provided by the...
A] Surface gauge 
B] Workpiece 
C] Drawing of the work 
D] Marking table surface

The vice clamps are used to.

27] The vice clamps are used to...
A] Protect hard jaws 
B] Clamp the work pieces rigidly
C] Protect the finished surfaces 
D] Prevent the movable jaw being filed

While cutting small diameter pipes, it is advisable to watch regularly and ensure that.

26] While cutting small diameter pipes, it is advisable to watch regularly and ensure that...
A] The cut is along the curved line 
B] More saw teeth are in contract 
C] The work is not overheated 
D] Proper balancing of hacksaw is maintained

A new hacksaw blade after a few strokes becomes loose because of the.

25] A new hacksaw blade after a few strokes becomes loose because of the...
A] Stretching of the blade 
B] Wing-nut threads being worn out 
C] Wrong pitch of the blade
D] Improper selection of the set of saws.

For cutting solid brass, the most suitable pitch of the hacksaw blade is.

24] For cutting solid brass, the most suitable pitch of the hacksaw blade is...
A] 1.8mm 
B] 1.4mm 
C] 1mm 
D] 0.8mm

For cutting thin tubing, the most suitable pitch of the hacksaw blade is.

23] For cutting thin tubing, the most suitable pitch of the hacksaw blade is...
A] 1.8mm 
B] 1.4mm 
C] 1mm 
D] 0.8mm

Which one of the following is an indirect measuring tool?

22] Which one of the following is an indirect measuring tool? 
A] Outside caliper 
B] Vernier calliper 
C] Steel rule
 D] Outside micrometer 

21] The instrument used to mark parallel lines, parallel to the datum edge is -
A] jenny caliper 
B] Divider 
C] Outside calliper 
D] Inside calliper 

The size of the dividers are specified by the

20] The size of the dividers are specified by the -----------
A] Total length of legs 
B] Distance between the points when fully opened 
C] Length of legs without points 
D] distance between the pivot and the point 

The caliper meant for measuring the width of a slot is.

19] The caliper meant for measuring the width of a slot is...
A] Odd leg caliper 
B] Outside caliper 
C] Jenny caliper 
D] Inside calliper

One micrometer (U] is equal to

18] One micrometer (U] is equal to...
A] 0.1mm 
B] 0.01mm 
C] 0.001mm 
D] 0.0001mm

For basic categories of safety signs are available The meaning of”prohibition” sign

18] For basic categories of safety signs are available The meaning of”prohibition” sign ----
A] shows it must not be done 
B] Shows what must be done 
C] Warns the hazard or danger 
D] Gives information of safety provision 

Safety is -

17] Safety is -----------
A] nobody’s business 
B] every bodise business 
C] Some bodies business 
D] The organization business 

Benefit of SS system is

16] Benefit of SS system is ------
A] Increase in productivity 
B] Increase in quality 
C] Reduction in wastage of time 
D] All of these 

In Japanese Seiko stands for

15] In Japanese Seiko stands for --------------
A] Shine 
B] Sort 
C] Standardize 
D] Sustain 

Colour code for Bins for waste paper segregation is

14] Colour code for Bins for waste paper segregation is -----
A] blue Colour 
B] Yellow Colour 
C] Red Colour 
D] Green Colour 

First aid is given to an injured or ill person primarily..

13] First aid is given to an injured or ill person primarily....
A] Save life 
B] Prevent further deterioration of the muff’s 
C] Give best possible comfort 
D] All of these 

In case of an accident, the victim should in

12] in case of an accident, the victim should in
A] Asked to take rest 
B] Attended immediately 
C] leave him 
D] None of above

In case of bleeding, take treatment Of

11] In case of bleeding, take treatment Of 
A] cold 3" and rest 
B] spray cold water 
C] Bandage immediately -----. 
D] Enquire about the accident thought treatment 

Which type of fire extinguisher is used to put off general fire?

10] Which type of fire extinguisher is used to put off general fire? 
A] Water type Extinguisher 
B] Foam type Extinguisher 
C] Dry chemical powder Extinguisher
 D] Carbon dioxide (C02] Extinguisher 

To put off”Class B” fire, the types of fire extinguisher used is

9] To put off”Class B” fire, the types of fire extinguisher used is ............ 
A] dry power 
B] Carbon dioxide 
C] Jet of water 
D] Foam type 

ABC stands for-

7] ABC stands for --------------
A] Automatic Breathing Control 
B] Automatic Blood Control 
C] Airway Breathing Circulation 
D] Automatic Blood Circulation 

ln Personal Protect Equipment (PPE], 'sleeves’ is used to protect

6] ln Personal Protect Equipment (PPE], 'sleeves’ is used to protect ----------
A] Face 
B] Eyes 
C] Ears 
D] Hands 

Which of the following is done for machine safety?

5] Which of the following is done for machine safety? 
A] Check the oil level before starting the machine 
B] Do things in a methodical way 
C] Keep the floor and gangways clean and clear
D] Don’t use dies and scarves 

While grinding, which is used to protect the eyes?

4] While grinding, which is used to protect the eyes? 
A] Dark green glass 
B] Mask 
C] Sun glasses 
D] Safety goggles

Which of the following belongs to general safety?

3] Which of the following belongs to general safety?
A Have a worker in good attitude
 B] The work  clean and clear 
C] Concentrate on your work 
D] Keep the floor and gangways clean and clear

In Personal Protect Equipment (PPE] HELMET is used to..

2] In Personal Protect Equipment (PPE] HELMET is used to 
A] protect head 
B] Protect eyes 
C] Protect hands
 D] Protect ears

Which one is a workshop safety?

1] Which one is a workshop safety?

A] Keep shop floor clean and free from grease, oil or other slippery materials 

B] Stop the machine before changing the speed 

C] Don’t use cracked or chipped tools 

D] Don't try to stop a running machine with hand 


Web Design
Everything You Need To Sell 
Products And Services Online.